UPVC 45° Elbows DIN PN 10 (Solvent Joint)

Product Detail

Shanghai TU-POLY Industrial Co.,Ltd is one of the leaDINg UPVC 45° elbows DIN PN 10 (solvent joint) manufacturers and suppliers in China, should you be interested in UPVC 45° elbows DIN PN 10 (solvent joint), please feel free to wholesale and buy products from our factory.

Name: UPVC 45°Elbows DIN PN 10 (Solvent Joint)

Material: UPVC                                 

Standard: DIN

Size: F20~F400



UPVC 45°Elbows DIN PN 10 (Solvent Joint) Description:  

Light weight

The weight per unit is oily 1/6 of the cast-iron pipes, so the transport is quite convenient.

High strength

The strength can get to 45Mp.

Low resistance

The internal surface of the pipe is smooth with no dirt and no blockage. The loss is 30% lower than that of the cast-iron pipes.

Corrosion resistance

It has a good quality of acid resistance, alkali resistance, chemicals resistance and electrochemistry resistance, so the point of corrosion will not occur during the use.

Easy installation

It adopts the glue and soft joining. Therefore, the installation is quite easy and the sealing is reliable.

Long service life

The service time can reach more than 50 years under the normal working pressure.

Low cost

The cost of the transport and installation is low, and the total engineering cost is 30-40% lower than of the cast-iron pipes.

Innocuity and sanitation

The product conforms to the standards of the drink water and water transported has no second pollution. 

UPVC 45°Elbows DIN PN 10 (Solvent Joint) Specification:

Spec D(mm)	size
	H	Z
F20	16	23.5
F25	19	26.5
F32	22	32
F40	26	38
F50	31	45.5
F63	38	54
F75	44	62.5
F90	51	75
F110	61	89
F125	70	99.5
F140	76	110.5
F160	86	121.5
F200	106	150
F225	119	160
F250	131	186.5
F315	164	234
F400	206	305